shelly i 4

Use the guide for DDD available here: - ddd_communication.pdf

here is the part you need: -

What commands are possible between a Shelly device

Detailed description can be found here https://shelly-api-docs.shelly.cloud/, but we will try to make a simple for you.

Shelly relays: 1/1PM/2/2.5/4Pro

The command syntax to contorl them is:

http://[deviceIP]/relay/[channel]?[command]&[command]

if you use authorisation syntax is:

http://user:pass@[deviceIP]/relay/[channel]?[command]&[command]

[device IP] and [channel] - can be check from the APP in menu Settings -> Device

Info.

Channels start from 0, that’s mean Shelly2.5 have channel 0 and channel 1 for

Output1 and Output2.

[command] could be:

turn=on - switch output ON

turn=off - switch output OFF

turn=toggle - reverese state

On and off can be combined with timer:

timer=X - where X is in seconds. Switch output will be turned On or OFF for X seconds and will be

switched back to previews state after that.

Examples:

http://192.168.0.40/relay/0?turn=on Will switch output ON.

http://192.168.0.40/relay/0?turn=on&timer=10 Will switch output ON for 10 sec.

http://192.168.0.40/relay/0?turn=toggle Will switch the output On if OFF or vice

version.

Shelly rollers : 2/2.5

The command syntax to control them is:

http://[deviceIP]/roller/0?[command]&[command]

[command] could be:

go=open - open roller

go=close - close roller

go=stop - stop roller

go=to_pos&roller_pos=0-100 - open roller to this position. Need to calibrate it before that.

Open and close can be combined with the duration

duration=X - move the roller X seconds.

Examples:

http://192.168.0.40/roller/0?go=open Will open the roller

http://192.168.0.40/roller/0?turn=open&duration=5 Will opening 5 seconds.

http://192.168.0.40/roller/0?go=to_pos&roller_pos=30 Will Open at 30%

e.g. for lights would be

http://192.168.0.40/light/0?turn=on

maybe others can confirm

Hi there, Isn´t there a GUI where I can perform this task without needing to type commands?

Zitat

Hi there, Isn´t there a GUI where I can perform this task without needing to type commands?

See if you can raise this as a feature request with shelly,

I’m using Home Assistant to make this easier to manage using automations and blueprints another way is to use Node-Red

Thanks for the response. will do so.