Shelly 1L not sending command to URL adress

ManganH

Hi

I have a problem getting a Shelly1L to send a command through URL to a Shelly RGBW2.

The URL works when i type it in to my webbrowser and the Relay in the Shelly1L responds when i try to turn it on in the app and on the physical switch.

I've tried to enable "button 1 switched ON URL" and "Output switched ON URL", in the Shelly1L, both separately and combined to the same URL but neither does the trick.

Any suggestions or does anyone known of an old thread where the issue has been addressed?

Eric3412

I use a Shelly 1L (firmware 1.11.8) to send commands to a Shelly Dimmer2 and a Shelly plus 1, and it works fine.

I use IO actions on :

Button 1 Long push

Button 2 Long Push

Button 2 Short Push

All works fine. My "Button type 1" is configured as "momentary on release" and "Button type 2" detached.

pasted-from-clipboard.png

Shelly 1L not sending command to URL adress

Ähnliche Themen

Control Plug S through Cloud API

Shelly 1 reading json status in Python

Enable for 3 minutes on long press with 1PM