Shelly button red LED

Hi all,

I have a Shelly Button1 device. I was able to add it as a device and it is visible in my Shelly app. When I press the button the led blinks rapidly in white/blue color and then it turns fixed red. Any action or setting I try to set in the app has no effect. I tried resetting it several times with the reset button but the result is always the same. I also tried plugging in the USB to set it as Access Point but again no effect.

Does anybody have any suggestion?

Thanks!

Roberto

Thanks, the problem seems to be solved or at least I am able to replicate it and see when it happens. I have reset the button and have been able to assign actions to it. They all work fine.

The problem appears when I assign a static IP address to the device. After I save the static setting, the device flashes and it becomes unreachable. Any further action has no effect and I have to reset the button.

I assigned a static IP because the app recommends to do so but if it works without this I can easily leave it as is. Static IPs are more useful for the other Shelly devices towards which I send the commands from the button