Shelly Plus 1 for gate opener

Christophe Lindstrom

I installed a Shelly Plus 1 to operate an electric gate at my home. I currently have the relay set to Auto-Off after 0.5 seconds which simulates a button press for the remote.

However, I would also like to have an option where I can hold the gate open until indefinitely by closing the dry contacts until the turn the relay off. Is there a way to have multiple "buttons" in the Shelly app that I can press depending on the desired outcome?

For example, another mode would be "hold open for 10 minutes"

Any ideas on how I can do this?

vraykov

Sie können mit Scenes spielen.

MIHO

Dies funktioniert nicht über eine Schaltfläche in der App. Alles, was Sie tun können, ist einen Knopf zu drücken. Eine Möglichkeit wäre, einen Http-Befehl mit entsprechendem Timer zu nehmen und bei Bedarf auszuführen.

HTTP-Request Shelly PLUS 1 - Offizielles technisches Shelly Support Forum (DACH)

HTTP-Befehle sollten den eingestellten Timer von 0,5 ignorieren.

66er

What about a 2nd Shelly ?

MIHO

I think I misunderstood it a little. Sorry.

Scenes is the way to go if you're working with the cloud.

Create a scene called Gate open for 10min.

Select a date and time in the distant future as the trigger in the scene.

Then switch on the Shelly plus 1 and switch it on again after 10 minutes.

You can then always play this scene manually in the app using the play button.

Without a scene, a second Shelly would be possible.

Shelly Plus 1 for gate opener

Ähnliche Themen

Using a shelly plus 1 to notify when circuit turns on