Use Shelly 1 without any external switch

Hello,

today I received my Shelly 1.
What I wanted to achieve is basically to use it to turn on / off lights via Alexa.

My setup looks like this:

- brown wire - input Phase > connected to "L”

- blue wire - input N > connected to "N"

- brown wire > going to 5 LED array

- blue wire > going to 5 LED array

What I tried was to "simply" not attach anything to the "SW" port as I don't have or need an external switch.
I was somehow hoping, that I could turn the switch on / off via the Shelly app and ultimatively with Alexa in the end.

I could use the shelly app, add the Shelly 1 as new device, and now I am also able to use the app and tap that virtual "ON" "OFF" switch.
When I do that I clearly hear the relay's click. But the lights are not switching on.

When I checked the output ports with the phasing tester, I could see that there was output at all when switching.

Am I missing something?

Is this device also meant to work for my scenario or do I need a switch to get this to work?

Thanks a lot

First of all thanks for your quick response!

No, my LEDs are permanently off right now.
They don't turn on.

If I ignore the right part of you image (switch and transmitter), I realize that I clearly did NOT wire my lights like the receiver / socket setup.

This is what I did instead:

Shelly_1_wiring_test_1.png

Obviously my wiring does not work, so I'll try your suggestion tomorrow.

Thank you VERY much!

Great - understood!

I'll try this tomorrow.

Thanks a lot!