Collection of http-commands

As I keep asking for it, I am gradually creating an overview of standard commands for each device.

In all commands, replace "192.168.xxx.xxx" with the IP address of the target Shelly!

The commands can be sent via browser, Actions in Shelly or other home automation systems.

Contents:

#1 Shelly 1

#2 Shelly 2.5 in 2 switch mode

#3 Shelly 2.5in roller mode

#4 Shelly PlugS

#5 Shelly Bulb

#6 Shelly Duo und Duo GU10

#7 Shelly Dimmer und Dimmer2

#8 alle Shelly

#9 Shelly Motion

In the case of password-protected devices, the user data must be placed in front of the IP address command.

http://user:password@192.168.xxx.xxx ...

of course adjust user and password.

Shelly 1:

Turn on:

 http://192.168.xxx.xxx/relay/0?turn=on

Turn off:

  http://192.168.xxx.xxx/relay/0?turn=off

Turn on and after ttt-seconds automatically turn off:

(ttt replace with the desired time in seconds!)

  http://192.168.xxx.xxx/relay/0?turn=on&timer=ttt

The code can also be sent to an already activated Shelly. This will stay on for ttt seconds and then turn off automatically.

Turn off and after ttt-seconds automatically turn on:

(ttt replace with the desired time in seconds!)

  http://192.168.xxx.xxx/relay/0?turn=off&timer=ttt

The code can also be sent to an already switched off Shelly. This will remain switched off for ttt seconds and then automatically switched on.

Switch toggle:

http://192.168.xxx.xxx/relay/0?turn=toggle

Contents:

#1 Shelly 1

#2 Shelly 2.5 in 2 switch mode

#3 Shelly 2.5 in roller mode

#4 Shelly PlugS

#5 Shelly Bulb

#6 Shelly Duo und Duo GU10

#7 Shelly Dimmer und Dimmer2

#8 alle Shelly

#9 Shelly Motion

Shelly 2.5:

in 2-switch-mode

channel 1

Turn on:

http://192.168.xxx.xxx/relay/0?turn=on

Turn off:

http://192.168.xxx.xxx/relay/0?turn=off

Turn on and after ttt-seconds automatically turn off:

(ttt replace with the desired time in seconds!)

http://192.168.xxx.xxx/relay/0?turn=on&timer=ttt

The code can also be sent to an already activated Shelly. This will stay on for ttt seconds and then turn off automatically.

Turn off and after ttt-seconds automatically turn on:

(ttt replace with the desired time in seconds!)

http://192.168.xxx.xxx/relay/0?turn=off&timer=ttt

The code can also be sent to an already switched off Shelly. This will remain switched off for ttt seconds and then automatically switched on.

Switch toggle:

http://192.168.xxx.xxx/relay/0?turn=toggle

channel2

Turn on:

http://192.168.xxx.xxx/relay/1?turn=on

Turn off:

http://192.168.xxx.xxx/relay/1?turn=off

Turn on and after ttt-seconds automatically turn off:

(ttt replace with the desired time in seconds!)

 http://192.168.xxx.xxx/relay/1?turn=on&timer=ttt

The code can also be sent to an already activated Shelly. This will stay on for ttt seconds and then turn off automatically.

Turn off and after ttt-seconds automatically turn on:

(ttt replace with the desired time in seconds!)

http://192.168.xxx.xxx/relay/1?turn=off&timer=ttt

The code can also be sent to an already switched off Shelly. This will remain switched off for ttt seconds and then automatically switched on.

Switch toggle:

http://192.168.xxx.xxx/relay/1?turn=toggle

Contents:

#1 Shelly 1

#2 Shelly 2.5 in 2 switch mode

#3 Shelly 2.5 in roller mode

#4 Shelly PlugS

#5 Shelly Bulb

#6 Shelly Duo und Duo GU10

#7 Shelly Dimmer und Dimmer2

#8 alle Shelly

#9 Shelly Motion

Shelly 2.5:

as a roller shutter

open shutters:

 http://192.168.xxx.xxxx/roller/0?go=open

close shutters:

 http://192.168.xxx.xxxx/roller/0?go=close

shutter go x-%-Position:

(x=0-100)

 http://192.168.xxx.xxx/roller/0?go=to_pos&roller_pos=x

shutter stop:

 http://192.168.xxx.xxx/roller/0?go=stop

Contents:

#1 Shelly 1

#2 Shelly 2.5 in 2 switch mode

#3 Shelly 2.5 in roller mode

#4 Shelly PlugS

#5 Shelly Bulb

#6 Shelly Duo und Duo GU10

#7 Shelly Dimmer und Dimmer2

#8 alle Shelly

#9 Shelly Motion

Shelly Plug(S):

Turn ON:

  http://192.168.xxx.xxx/relay/0?turn=on

Turn OFF:

  http://192.168.xxx.xxx/relay/0?turn=off

Toggle:

  http://192.168.xxx.xxx/relay/0?turn=toggle

Turn ON and after ttt-seconda turn off autoamatically:

(ttt replace with the desired time in seconds!)

 http://192.168.xxx.xxx/relay/0?turn=on&timer=ttt

The code can also be sent to an already activated Shelly. This will stay on for ttt seconds and then turn off automatically.

Turn off and after ttt-seconds automatically turn on:

(ttt replace with the desired time in seconds!)

http://192.168.xxx.xxx/relay/0?turn=off&timer=ttt

the code can also be sent to an already switched off Shelly. This will remain switched off for ttt seconds and then automatically switched on.

Content:

#1 Shelly 1

#2 Shelly 2.5 als 2-fach Schaltaktor

#3 Shelly 2.5 als Rollladenaktor

#4 Shelly PlugS

#5 Shelly Bulb

#6 Shelly Duo und Duo GU10

#7 Shelly Dimmer und Dimmer2

#8 alle Shelly

#9 Shelly Motion

In the case of password-protected devices, the user data must be placed in front of the command of the IP address, i.e.:

Code

  http://user:passwort@192.168.xxx.xxx ...

Adjust user and password, of course.

Shelly Bulb:

turn on:

http://192.168.xxx.xxx/color/0?turn=on

turn off:

http://192.168.xxx.xxx/color/0?turn=off