Hi, you're right the signal is reported too often if I put 0.5 as a threshold. But I did some tests, and if I put 1, sometimes it doesn't give me any signal for hours (tonight for example from 4 to 7 it didn't report anything, but the T and the H have changed). Shouldn't it report the data every hour regardless of the change or not?
Thank you
Thanks Sorefeet, It took a while, but now it seems that the sensor reports the data every hour. I had to set the temperature and humidity threshold to 0.5.
Thanks so much
Hi Sorefeet, I tried to follow your advice and lower the thresholds. It initially reported the data correctly at 17/18/19/20, then it again reported a change until 4 this morning. There was little change in temperature, but the humidity in all this time went from 82% to 70% and nothing was reported.
I have exactly the same problem as Magna91.
I don't care about the error message if it works, but is there a way to send the sensor reading for example every hour even if it doesn't get over the threshold?
Now it's more like every 3-12h
146/5000
identical to me, today for example has sent the values at 11am and at 14am and now I no longer have any value. yesterday only sent one value in 24h.
Hello, I have the same problem. I have reset H&T several times and re-associated to the cloud, but it keeps giving me the same error, updating the data with spot times (maybe 2 hours consecutively, then another 10 hours pass before it updates). How can I do?
Thanks
