Hello,
Well not finding a solution, I will replace the switch and take a feller like the others.
Thanks again for your help
Hello,
Well not finding a solution, I will replace the switch and take a feller like the others.
Thanks again for your help
yes I calibrate (2 times) I try again
Hello,
Don't you have an idea for this kind of button?
Thank you very much
so, I already tried with the momentary but it's that when you click down, it goes down and it stops by itself after a few seconds. Then I can't click to move it down again.
I have to click on up and then down again
Hello,
Sorry for the delay in answering.
So actually, I have 2 types of switches.
The feller in the bedrooms (push button) and indeed, in "toggle" mode it works very well. (Thanks you)
In the living room, it's other switches (not push buttons) and that's the problem.
ok thanks a lot, I'll try tonight
Hello,
thanks for the info, I already did the test but unfortunately I have the same problem. I can press once but not a second time.
Example:
To make the roller shutter go down, I press "down". I receive the information well.
In "toggle" mode, it works but I can't stop it. (if I want to stop it before the end)
In "momentary" mode, it stops but I can't tell it to go down again (by pressing again) it doesn't send the information back.
I don't speak English, so the translator translates. So I hope you understood
yes indeed, it works only for a few seconds when I am in "momentary" mode
The switch works but only once. That's why I was looking for the "Edge" mode to have at each impulse the information
Yes, if you find something in the German forum, it would be great. Because I'm stuck on this problem since a few weeks
Thanks a lot
Yes, when opening or closing, there is consumption.
the problem is that I can't press the same button more than once
it's a feller roller shutter
https://www.galaxus.ch/fr/s4/product/…cB&gclsrc=aw.ds
There is no stop button
Hello,
Thank you for your answer.
So I have a shelly 2.5 in Roller shutter mode.
I tested the "momentary" mode but when I click on "down", the blind goes down for a few seconds then stops. Then I can't press "down" anymore, I have to press "up" first and then I can press "down".
From the application, no problem, everything works fine but it's really from the switches.
Hello,
I need for my installation, use a Edge Mode for my Roller Shutter with a Shelly 2.5.
my problem is that I can't find the "Edge Mode" in the settings. I can see "momentary mode", "toggle mode" and "detached mode" but not the Edge Mode.
Is there a trick to display it ?
There is a picture of my Setting > Button Type AND Firmware version:
Opera Instantané_2021-03-11_185137_192.168.1.34.pngOpera Instantané_2021-03-11_185206_192.168.1.34.png
Thanks a lot