Ok this workaround work fine.
I await the solution of the problem
Thanks
Ok this workaround work fine.
I await the solution of the problem
Thanks
ok Thanks, now I try but this is just a workaround
I would also like to know if it is possible to implement a button type with short pulse for switching on and long pulse for switching off of my equipment, or better it would be possible to set the duration of the two pulses ON and OFF, so it would be very generic
I want out 2 to work this way
any settings on OUT 2 about my shelly UNI
behaves as if this setting were set
I want that when I press the button on output 2 there is only one pulse. And I want this button not to be conditioned by input 2, but to be free, detached from IN 2.
As for the schematic it is not important, but if you really want to know then let's say that I use a multimeter in resistance mode and I watch when the optocoupler is on or off
I have a very big problem.
I have make an product with an shelly UNI but the Button Type don't work, exactly always behaves like a toggle switch.
I would like a "Detached" button, separated from the relay and that works in momentary mode, like an pushbottom.
This doesn't work on shelly uni, and all settings in button type always behave like a toggle switch.
How can I do?
Thanks, I have write to Feature Request to Allterco.
thanks I tried with another router and now it worked, but the App on my iPhone does not work very well and the shelly UNI icon is not there. It not is my first shelly and I've had problems with others too.
An important question: because ADC does not have the graph like temperature, it would be important to have it!
I have a UNI shelly and I use it with 192.168.33.1 but I can't associate it with the APP. Furthermore in discovery in the APP do not see the image about SHelly UNI for correct selection and I select "ADD ALL". The APP ask to connect at Shelly UNI and add it to the wifi network but after cannot find it to add to the room.
I use Iphone 6+ with IOS 14.4
I follow this procedure:
setting - add Device
chose the wifi network
insert the password of the wifi network
In the "choose device type to include" it does not appear Shelly UNI and I touch "INCLUDE ALL"
The app find Shelly and I touch "sign in"
after
check included devices...
and view 1 device added
Now I can't find the device the new device in app for include in the room.
Can you help me?