Beiträge von DerBU

  • KeyPressed Anzeige

    Alle Shellys bekommen trotz DHCP immer dieselbe IP.

    Mittels eines Tasters beschicke ich SW am Shelly1 und erwarte, dass der http request gesendet wird.

    Code
    {"device":{"type":"SHSW-1","mac":"E8DB84D3AFB0","hostname":"shelly1-E8DB84D3AFB0","num_outputs":1},"wifi_ap":{"enabled":false,"ssid":"shelly1-E8DB84D3AFB0","key":""},"wifi_sta":{"enabled":true,"ssid":"BUsHotSpot","ipv4_method":"dhcp","ip":null,"gw":null,"mask":null,"dns":null},"wifi_sta1":{"enabled":false,"ssid":null,"ipv4_method":"dhcp","ip":null,"gw":null,"mask":null,"dns":null},"ap_roaming":{"enabled":false,"threshold":-70},"mqtt": {"enable":false,"server":"192.168.33.3:1883","user":"","id":"shelly1-E8DB84D3AFB0","reconnect_timeout_max":60.000000,"reconnect_timeout_min":2.000000,"clean_session":true,"keep_alive":60,"max_qos":0,"retain":false,"update_period":30},"coiot": {"enabled":true,"update_period":15,"peer":""},"sntp":{"server":"time.google.com","enabled":true},"login":{"enabled":false,"unprotected":false,"username":"admin"},"pin_code":"r1aKw#","name":"EMS1_RolloAuf","fw":"20210909-144114/v1.11.4-DNSfix-ge6b2f6d","factory_reset_from_switch":true,"discoverable":false,"build_info":{"build_id":"20210909-144114/v1.11.4-DNSfix-ge6b2f6d","build_timestamp":"2021-09-09T14:41:14Z","build_version":"1.0"},"cloud":{"enabled":true,"connected":true},"timezone":"Europe/Berlin","lat":50.986938,"lng":6.890820,"tzautodetect":true,"tz_utc_offset":7200,"tz_dst":false,"tz_dst_auto":true,"time":"22:07","unixtime":1632600477,"debug_enable":false,"allow_cross_origin":false,"ext_switch_enable":false,"ext_switch_reverse":false,"ext_switch":{"0":{"relay_num":-1}},"actions":{"active":true,"names":["btn_on_url","btn_off_url","longpush_url","shortpush_url","out_on_url","out_off_url","lp_on_url","lp_off_url","ext_temp_over_url","ext_temp_under_url","ext_temp_over_url","ext_temp_under_url","ext_temp_over_url","ext_temp_under_url","ext_hum_over_url","ext_hum_under_url"]},"hwinfo":{"hw_revision":"prod-191217", "batch_id":1},"mode" :"relay","longpush_time":1000,"relays":[{"name":null,"appliance_type":"General","ison":false,"has_timer":false,"default_state":"switch","btn_type":"detached","btn_reverse":0,"auto_on":0.00,"auto_off":0.00,"power":0.00,"schedule":false,"schedule_rules":[]}],"ext_sensors":{},"ext_temperature":{},"ext_humidity":{}}

  • KeyPressed Anzeige

    Hallo, gibt es eine Möglichkeit zu sehen, ob ein Taster einen detached SW ausgelöst hat?

    Hintergrund: 2 Shelli1 jeweils mit SW detached; ShortPress enabled; http ok => leider kein Schalten auf der Gegenseite

    Gleiches Problem bei einem Schelly 2.5 ...

    Auch eine Szene läßt sich nicht ansteuern...

    Was mache ich falsch?

  • einfache Reparatur für fehlerhafte Shelly Uni und Shelly I3 nach dem Out of the box - Update auf FW 1.11

    Hallo, meine 8 ix3 sind unbrauchbar.

    ausprobierte Firmware Versionen

    - SHIX3-1_build.zip (aus dieser Anleitung)

    - SHIX3-1.zip (von der amerikanischen Hotline)

    - ix3_v18.zip (aus dem Shelly-Firmware-Verzeichnis)

    .Das Updating erfolgt in 0,5 m Entfernung zum Rechner

    .mehrere Shellys ausprobiert

    .Ubuntu-Server aufgesetzt

    .I3-Reset

    .Ich erreiche die I3-WEB-Oberfläche unter 192.168.33.1

    .http://192.168.33.1/ota?url=http:/…IX3-1_build.zip (mit der jeweiligen Firmwareversion)

    .Ich erhalte auch nach 5min das anhängende Ergebnis

    .Reaktion Ami-Hotline: We see that the unit is in AP when you try to perform the update. Please connect the unit firstly to your network and then start the update.

    Was mache ich falsch?Bildschirmfoto 2021-09-23 um 08.32.45.png