Hello,
I'm using MQTT protocol in shelly EM.
Is it possible to configure the time that the device will make the Publisher in the broker (mosquitto)?
I would like to parameterize shelly to publish to the broker in 60 to 60 seconds.
Hug.
Hello,
I'm using MQTT protocol in shelly EM.
Is it possible to configure the time that the device will make the Publisher in the broker (mosquitto)?
I would like to parameterize shelly to publish to the broker in 60 to 60 seconds.
Hug.
Hi, can someone help me.
This Enable MQTT - on my ShellyEM device.
How do I reduce the device publishing time (data sending)?
Is the data sending time parameterizable?
Hug
Hello everyone!
I recently purchased a Shelly EM DEVICE – I'm trying to get it to connect to my home's wifi, but I'm not succeeding.
Problem encountered:
- The WIFI network access Point (AP) mode only enables (appears on my smartphone, phone and computer) if I keep the reset button pressed for more than 05 to 06 seconds.
- My device shelly – in WIFI CM (Client Mode) – only keeps connection established with my home's WIFI while I keep the reset button pressed.
What can be observed:
- If I keep pressed the device's reset button (> 10s), the device's LED blinks more often, at this moment the shelly's WIFI AP (Access Point) (shellyem-C45BB...) appears to be connected by my devices – Through shelly APK I can connect the device – I can even make shelly connect to my home's WIFI network. Device shelly enters WIFI CM mode; I can send PING commands to it.
- HOWEVER, when I release the reset button my device shelly loses the connection (disconnects) to the WIFI in my house and its WIFI AP disappears.
Procedures I've already performed:
- Try to apply factory reset – I follow the procedures in the manual – press and hold it for 10 seconds – it seems to me that the device is reset, but in fact the reset does not occur.
- During the procedure - the device LED blinks with higher frequencies, and when I release the reset button (with a time greater than 10s) the device relay is activated (I hear the noise)
I need a help!!
1- Does anyone know how to solve this problem (tips)?
2- Is there any other way to apply the factory reset on Shelly EM?
Hug