See my reply called:-
MOTION SENSOR NOT TURNING LIGHT OFF
for more detail
See my reply called:-
for more detail
The motion sensors do not give any push notifications anymore to my mobile phone. They were working.
If I trigger the scene there is no sound.
The Volume is at 100% on my phone.
I’ve allowed notifications on the Shelly app.
Do not disturb on my phone is disabled.
No permissions denied in the shelly app on my phone.
I’ve created the Scenes.
The following boxes are checked:-
“When Shelly sensor detects a motion”
“One time”
Condition is valid = 0 minutes
I’ve entered the date and start time under One time activation.
Push Notification
Delay this action = 0 minutes
Active time is set
Save scene
What does Condition Valid mean.
RESOLVED
I have to GO TO THE MOTION SENSOR NOT THE RELAY
So open Motion sensor by entering the IP of your Motion sensor in your browser NOT from the dashboard.
Actions/MOTION DETECTED /Check Enabled and enter this (you have to enter your IP for your light) Where there is an X you put your IP number.
http://192.168.1.211/relay/0?turn=on
From: 00:00 To 00:00
Then 4 lines down I will see :-
END OF MOTION DETECTED
ENETER THIS:-
http://XXX.XXX.X.XXX/relay/0?turn=off
From: 00:00 To 00:00
Note :- The problem was under END OF MOTION DETECTED it read =on believe it or not.
I cannot get the Shelly Motion Sensor to turn the light off.
It switches the light on.
The 9 GU10 Bulbs are controlled by a Shelly 1L and it works.
I've tried to put the following in The Shelly 1L I/O URL Actions/BUTTON 1 SWITCHED ON URL
http://192.168.X.XXX/relay/0?turn=on
( I wrote the correct numbers instead of X )
and in BUTTON 1 SWITCHED OFF URL I wrote:-
http://192.168.X.XXX/relay/0?turn=off
In the motion sensor Blind time is 1
Can anyone help.
How do I delete a post I wrote.