The last hour is missing in "day" view for sensor grah.
For example, capture done at 13h45.
"Day" view stop at 12h00 :
Capture d’écran 2022-02-23 134357.png
Whereas "Last 24h view" stop at 13h00 :
Capture d’écran 2022-02-23 134428.png
And it will be fine if we can choose the default view, or if latest view was saved.
Previously at opening the selected choice was "day", but the graphic was "last 24 hours". Now it is really "day", and I prefer "last 24 hours".
Hi,
Big issue in latest version.
Can't access to roller (shelly 2.5), page doesn't load (idem on home.shelly.cloud and on android app)
Hi,
If it was possible, it should be something like :
http://ip_to_control/light/0?turn=on&brightness="http://localhost/status/light/0/brightness"
But i don't think reading status in "Action URL" is possible.
1. Shelly now thinks the older firmware is newer.
Same for me : Firmware 1.11.8 for Gen1 devices is released
Hi,
Back to previous version on Shelly dimmer 2 ?
I have installed 1.11.8 yesterday, and today I have 1.11.7 again as new version ?
Why alterco did that (version 1.2.17) , it's ugly !
Edit: As soon appeared, as soon disappeared (without version change), much better !
Hi,
In roller shutter groups, the percentage icon for position is the one of dimmer instead of roller.
Screenshot_2022-01-19-13-59-29-50_3d2e6618865979214708a1021e42ab39.jpg
Hi,
Is there a way to permanently remove the message "Setting a static IP for the device is recommended" in the app each time we open the device page ?
For some unknown reason my shellies doesn't work with static ip, but work fine without. And my H&T is powered with external power supply, so it works fine without static IP. But this message is boring .
Hi,
All firmware are available in filebase/firmware archive.
If you don't want /can't use the http ota update, just use the second part of the generated link to download the firmware.
Example : url generated for ip 192.168.0.1 for shelly 1 with latest firmware : http://192.168.0.1/ota?url=http:/…HSW-1_build.zip
You can download the firmware @ http://archive.smarthome-forum.eu/v1.11.7/SHSW-1_build.zip
Latest firmware are also available on shelly api website : https://api.shelly.cloud/files/firmware
But for flashing to stock from tasmota it seems that is not very simple, need some intermediate step, read this post and followings : RE: How to load stock firmware via serial?
Not really bug, but improvements :
For shelly dimmer, I think dimming percentage should be place before power, as it was done for position for roller shutter. It would be more coherent :
For shelly H&T widget (android) it would be good to have at least one decimal for temperature. Without decimal, temperature is really not precise enough (and the 100% power could be removed when external power is set) :
Hi,
Scene trigger for Shelly 1L should be the same as for Shelly dimmer 2, with separated trigger for state 1/2 and button 1/2. Currently there is only 1 for Shelly 1L
Trigger for Shelly dimmer 2 :
Trigger for Shelly 1L :
Hi,
With Shelly home and new apps we have now scene trigger for each Input and Button for Shelly dimmer 2, but not for Shelly 1L. Why such difference ? Why not triggers for each button for Shelly 1L ?
Trigger for Shelly dimmer 2 :
Triggerfor Shelly 1L :
After reading more documentation, it seem that the 1L size in knowledge base page is wrong.
The 1L has the same size as Dimmer 2 (42x36x14) and not as shelly 2.5. So wall switch documentation is OK.
Mark as resolved
Setting is back with 0.9.1 firmware.
Hi,
I think there is some issues on shelly's documentation about wall switch holder.
This is what shelly says :
1 button Shelly Wall Switch :
- Relay holder 1 – Shelly 1 / Shelly 1PM
- Relay holder 2 – Shelly Plus 1 / Shelly Plus 1PM
- Relay holder 3 – Shelly 1L / Shelly Dimmer
2 button Shelly Wall Switch :
- Relay holder 1 – Shelly 2,5
- Relay holder 2 – Shelly Plus Series (upcomming devices)
- Relay holder 3 – Shelly 1L / Shelly Dimmer
4 button Shelly Wall Switch :
- Relay holder – Shelly Plus Series
And the relay sizes :
- Shelly plus : 41x36x16
- Shelly 2.5/1L : 39x36x17
- Shelly Dimmer 2 : 42x36x14
So we should have an holder compatible with shelly 1L and shelly dimmer, which are not the same size, and a specific holder for shelly 2.5, which is the same size as shelly 1L. It's a bit strange isn't it?
Hi,
Not found how to change SNTP SERVER in Shelly Plus 1. It's no more possible ? (firmware 0.8.1)
