Beiträge von mezaw

Maximum temp of 35c in app.

I’m using a Shelly 1PM plus to control the heater on a hot tub.

Using the thermostat function in the app the maximum temperature the thermostat will allow is 35c. This is not hot enough.

How can I adjust the maximum to 40c?

Turns out this was pretty easy, nice job Shelly!

I turned on the Range Extender function on the 1PM Plus and the connected the 1PM Wi-Fi to it. Job done.

Hi

I've got a 1PM and 1PM Plus installed together in a hot tub outdoors.

The router (Ubiqity Amplifi HD) is 4 metres away through a patio door. Basically line of sight, excluding a sofa!

The 1PM has terrible wifi reception, drops in and out of reception randomly. It's pot luck when I open the Shelly app if the 1PM will be connected.

The 1PM plus has a solid wifi connection.

How can I set up the range extender function of the 1PM Plus to allow the 1PM to have a stable wifi connection?

thanks

I too have set up a Shelly 1PM today to control my hot tub.

It worked for an hour or so, then the shelly cut out with an over current protection notification. I disabled the overcurrent protection on the device in the shelly app.

I checked back an hour later and the tub is off and the shelly unresponsive.

I've turned the power off and on a few times but I can't get any response from the shelly, and thus now can't turn the tub back on.

The tub has a 3kw heater, and the pump appears to draw around 350w according to the shelly.

What's going on?

How do I get my shelly back on again?

I wonder if it's just not up to the job. It would be a shame as I'm using (well, intended to) a temp sensor on the 1PM to measure the tub temp.