Beiträge von soxprox

    2 of 5 lights in my candelabra remain on when the Shelly 1L is turned off, but are only dimly lit.

    I have a candelabra with 5 LED lights.

    I have fitted a bypass in the candelabra rose fitting

    * When I turn on the light switch the Shelly 1L relay clicks and all the lights turn on correctly.

    * When I turn off the light switch the Shelly 1L relay clicks 3 of the 5 lights turn off, but 2 remain dimly lit.

    Does anyone know if the Shelly 1L will work with Candelabras. The bulbs used are LED and the light fitting says each bulb should be limited to 42w

    I have two lights

    * One at the top of the stairs

    * One at the bottom of the stairs

    At the bottom of the stairs is a double light switch - Switch 1 controls the downstairs light, Switch 2 controls the upstairs light

    At the top of stairs is a single light switch - This just controls the up stairs light.

    I want both lights to be smart and controlled by Shelly 1L's.

    I want to replace the single switch at the top of the stairs with a double switch, but I don't want to add any new wiring, so the second switch I want to be connected to a Shelly 1L and used as virtual switch for the downstairs light.

    I think this means I will need to fit two Shelly 1L's each backbox? Could someone confirm if my thoughts are correct or if there is another, more appropriate way to achieve this?