Beiträge von O_Tiby

If shelly motion could be build in the ceiling, then it was an option. That would be a lot nicer then a seperate device somewhere..

and also the Sebson IR_ES_C isn't working.

Which one will work with the dimmer2?

its ridiculous, i tried a lot of different PIRs, different ones with relais. I cant imagine that none of these worked..

i tried this evening also the Sebson PIR, which is on the compatible list of the first post. But it isn't working on the Dimmer 2!

SEBSON - MINI INFRAROT BEWEGUNGSMELDER UNTERPUTZ (nur mit RGBW2! 230VAC)

I used my previous schematic.

The lamp can be normal controlled by the shelly. And the lamp is also working directly at the pir. But when i connect the pir to the Dommer 2 it isn't working! How can this?

Are these sensors also without relay? What is it then that I hear 'clicking'..

Ok, I see in the start post the Huber 50 HF listed, nevertheless the Goobay 96006 looks exactly as the other compatible mini sensors.

Today I tried different sensors with the Shelly DIMMER 2, but none of these works:

- Goobay 96006

- Orno presence sensor OR-CR-235

- Huber motion 50 HF

None of these work.. I tried everything;

- changed the DIMMER 2 for another

- used a normal pulse switch (works well)

- add the light directly on the sensors (works well)

- Set different Button types (but Activation switch should it be..)(none of these works)

but if I connect it to the SW1 of the DIMMER 2, it doesn't switch the shelly.

See image for the scheme I used.

Why isn't it working?

EDIT; just some, some, sometimes the sensor triggers the shelly. But mainly you here the relais in the sensor switching but nothing happens at the DIMMER 2

EDIT2; Add the scheme I used for the Huber sensor

Zitat

I am using this sensors with Shellies, but in parallel.

Either the installed wall switches are activating the light via SW input of Shelly, or the installed Sensor which is connected to the lead which is going from O of Shelly to the Lamp.

As I never found a device of similar size which is working with Shelly, I learned to life with this arrangement.

Aaah, and it that way the lamp will be activated by the sensor, but:

- not visible in the shelly?

- So auto off can't be used/changed?

- And it isn't possible to set the dimming percentage?

But you can also activate the light through the switch and shelly? Am I right?

Hi all,

I'm trying to use the next PIR sensor, but it doesn't work together with the Shelly Without Shelly, PIR sensor directly connected at the LED light, it works perfect.

When I attach the PIR sensor (yellow) to the SW1 input of the Shelly it doesn't work like a switch. Does somebody knows why?

Dimmer:
https://nl.aliexpress.com/item/329548890….91f84c4d7H447C

[Blockierte Grafik: https://ae01.alicdn.com/kf/HTB1tLtSX.LrK1Rjy1zbq6AenFXal.jpg]

No one?

Hi all,

I bought a Shelly Dimmer with the goal to add an PIR sensor (eg. connected to i1) and a switch (eg. connected to i2).

Nevertheless, the most PIR motion sensors have a delay time of minimal 10s (10s high signal).

I experience now that this isn't working with the Shelly Dimmer because of the 10s time delay.

And if the sensor works, then I see a problem to control the light by the switch.

I think I need a motion sensor, preferred working on 220/230v, that gives only one pulse instead of a longer time a high signal. But can't find these.

Can someone help?