Beiträge von Ladegro

    I've installed two 4PM's in my circuit box. One of them is controlling my router equipment so after a reboot or something, that channel should always turn ON, otherwise I can't reach anything - including the shelly.

    I've read at Script to auto turn-on a switch if turned off that I would be able to set this up using Timers.

    But I'm missing that option in the webinterface? Both Shelly's only show the "Device", "Networks" and "Scripts" menu items. I'm running the latest firmware v 0.10.1

    How can I reach the Timers function?

    (not using Cloud connection, disabled AP, connected through LAN and MQTT).

    I'm facing the exact same issue. Not sure why this has been marked as resolved?

    Last night, at 3am, the lights on their own switched on. Looking at the Homeassistant logs, this seems to occur way more often than I was aware.

    Shelly dimmer 2 connected with neutral and with flip-switch - it powers three LED-spots of a few Watt each. It's on its own Wifi & VLAN and talks to HA over MQTT. No timers or other settings set in the Shelly itself.

    Wondering what could be done about this?

    Thanks, the thing is, I can't easily remove the 230V from the Shelly, not without also removing it from appliances I don't want it to be removed from :)

    So my conclusion is right that a reboot kind of mechanism can't be triggerred by button presses?

    Is there some kind of mechanism in development then, that will automatically tries to reconnect on a lost client-AP connection?