Beiträge von Onsibus

YEs, it works!!!

Thank you for the answers!

I didn't see the picture and the explain, sorry.

Enrico

Thank you for the answer,

but I'm able to enable/disable shelly motion with shortcuts ( ...settings?motion_enable = true ) BUT:

- It's not possible to use shelly cloud ( https:\\shelly...) to enable motion sensor

- so in the shortcuts before I have to enable VPN -> home so I'm in local network and then launch the command

- sometimes some device not risponding immediatly , so the command don't work

If it would be possible to enable/disable shelly alarm directly from shelly cloud I could use Iphone to enable/disable alarm when i go out/go back home

Or, alternatively, is it possible to activate a scene based on the location from the app?"

So it will be possible to enable/disable alarm based on position ( home - not at home) with shortcuts on Iphone.

Same issue

I figured it out myself: the error was that I was putting the "id" and "auth_key" parameters in the "params" section of Postman, but they should actually be placed in the "Body" section. That's how it works!!!

Hi,

With Postman, I am able to obtain the status of a Shelly 1 device.

POST https://shelly-31-eu.shelly.cloud/device/status/…id=E8DB84A039B3

"isok": true,

"data": {

"online": true,

"device_status": {

"actions_stats": {

"skipped": 0

...

However, when I try to turn it on,

POST https://shelly-31-eu.shelly.cloud/device/relay/c…039B3&auth_key=...

I receive the following error:

{

"isok": false,

"errors": {

"wrong_channel": "Could not control this relay channel!"

}

}

Can anyone help me?

Thank you Sascha,

I will follow your suggestion .

In the end,

I have too many problems with shelly UNI.

Disconnects from the network, is not visible outside the local network even if properly configured in cloud and other problems.

Exists others Shelly devices compatible with that input (18V) more stable?

Hi,

I have a Shelly UNI device that work perfectly in local wifi, like other Shelly 1 device.

But, even if Shelly UNI is correctly configurated in shelly cloud ( cloud icon ok when in local area) when I try to use in remote the device is offline.

I tried to disconnect reconnect reconfigurated but nothing work

Any idea?

Zitat

How much load do you switch? More than 100mA?

Less, 35mA

Zitat

Indeed - the Shelly UNI has (two) dry contacts. But the maximum current of each contact is 100mA; max. voltage is 36V if contact is open. Please keep this in mind!

I bought Shelly UNI, powered and configurated in the local wifi, all ok.

I set Button Type "Momentary" and "Auto OFF" after 1 sec.

But, even if when I push the button the door opened, after that the door opened again and again, randomly.

When the contact is open the voltage is 18V

Can I fix this problem?

Thanks

Thank you!!

Zitat

Shelly UNI

But Shelly UNI has dry contacts? It's necessary to open the door.

Thanks

Thank you!

Hi,

I would like to use Shelly to open a door with an (old) intercom where disponible supply is only 18 volts.

Exists a Shelly compatible with that input?