Beiträge von FiiMeRoNeR

Hello community !

I have 3 Theben Ram 714-8 thermostats that I want to change to Shelly ones. I could then do switching on and off scenarios with a Shelly H&T thermometer. Based on the current diagram, could you advise me which Shelly module I should install and how to connect it please?

Hello Everybody,

I just installed my electric box for my new swimming pool : PXL_20230728_165616042.jpg

NOw I would like to add 2 Shelly.
1 Shelly Plus 1 for the light.

1Shelly Plus 1 for the pump.

Schema coffret electrique piscine v2.0.jpg

I would like to keep my mechanical timer as well as the AUTO/OFF/MANUAL buttons. Just in case.
Do you think it will work with this diagram ?

For exemple :

• The OFF button keep the possibility to switch off the mechanical timer AND the Shelly. It's seem to be important for maintenance (cleaning the pump, active the 6 ways valves, etc...)
• The AUTO Button will be the usual utilisation, working with Shelly App and any voice assistant.
• The ON button will activate the pump anywhat appens. Even if the shelly's program is settings on Hold. Idem with the mechanical timer ?

Si ce n’est pas le cas je dois ajouter quelque chose au SW du Shelly ? Vous en parlez à de nombreuses reprises. Du coup dois-je ajouter quelque-chose à mon schéma ?

Pour l’utilisation du bouton de lumière aussi ?

Base on my wiring diagram and on this utility, can you tell me if I need to add something at my SW wiring please ?
For the light too ?

I'm pretty sure than you can do similary routine with https://control.shelly.cloud or with Home Assistant.
But I didn't look for it yet.

Hi I finally found what I'd missed.
It's my understanding of the pilot wire than mislead me. I though that it will be easy as a switch light.

Even if I already knew what was said in this table :
337706999_1188420515190286_3783842997838509304_n.jpg

it's important to remind than :
-The 2 switchs OFF : Confort

337685946_1261217518151196_1708607455242289897_n.jpg

-The 2 switchs ON : Eco mode

337533479_501839425313180_7246165275407003791_n.jpg

- 1 switch ON, 1 switch OFF : Stop Mode

337869976_1262371751365527_2356535669402886488_n.jpg

- The opposite : Hors-Gel

337685889_1639142189879794_8969836329678795333_n.jpg

I was really sure before reading this table, than the power will be OFF so the screen of the radiator will not be accessible. Then I understood than it won't be as simple as that.
So at the end, I found out than everything was right, and the problem was my confusion.

Finally I made 4 routines on Google Home.
337678523_936128104188443_6861872150578832020_n.jpg

Wel in first place :
Switch 1 (O1) on the Shelly Application was giving : 'Hors Gel' on my RAdiator
Swicth 2 (O2) on th Shelly Application was ginving : 'le statut prioritaire change' on my Radiator

and when I cut the power off and switch the wiring, it was the opposite :
Switch 1 (O2) on the Shelly Application was giving : 'Hors Gel' on my RAdiator
Swicth 2 (O1) on th Shelly Application was ginving : 'le statut prioritaire change' on my Radiator

witch make me sure than the wiring was correct.

I'm pretty shy to wright in English,
I'm sure than any translator in 2023 are better than my level in English. Sorry for the inconvenance.

About my installation, I'm sure than my wiring this afternoon is good. For example I changed the wiring S1 thru S2, and vice versa ans the result was pretty releiving.
Anyway Now I really can tell what can I do with the settings for approaching my will.

Thank you for your quick answer.
Now the question isn't about hardware anymore. It's about Software only.

I hop e some can give my way of reflexion, my knowledge is basicly low.

Hello,
Thank you for your response

i will wright in French and hop e you can translate easily :

voici le branchement que j'ai fait aujourd'hui:
PXL_20230326_151144194.jpg
Toutefois je ne sais pas quoi faire maintenant à cette etape.
J'aimerais pouvoir choisir de modifier parmi les 4 états suivants :
-Confort
-Eco
-Hors Gel
-OFF

Toutefois en l'état actuel des choses,
-Si les deux interrupteurs sont éteins, rien ne se passe.
-Si interrupteur 1 est allumé, le Hors Gel se lance.
-Si l'autre interrupteur est allumé, le statut prioritaire change sur l'écran du radiateur mais rien de plus.
-Si les deux interrupteurs sont allumés rien ne se passe.

Que dois-je configurer s'il vous plait ?

Hello,

I found this diagram on Facebook for controlling my Radiator with 4 stats

-OFF

-Low Temp security

-Eco

-Full power

323859841_716980359990978_7212353237204266948_n.jpg


This is what I'have done tonight :

PXL_20230325_175417433.jpg

PXL_20230325_175142908.jpg
What do you guys think ? Is it correct ?

I'm waiting for a aprobation before switching the power on.

Regards,
FiiM