Beiträge von andrewgroup

My intrusion system can send http get commands, but has no pause option between commands.

If I send the Pro the command to turn on for 2 seconds

followed by the command to turn off the relay for 2 seconds the 2nd command overrides the on command...

which led me to discover if the relay is off, and you send a 2-second off command the relay will power on in 2 seconds.

(that seems to be odd) If the relay is off, then it should not turn the relay on after 2-seconds..

It seems I may need a script that will cycle the relay on & off a number of times.

I found a sample script in the library, but it uses a switch input.

htto

I am a shelly newbie, and was wondering if a script can be triggered from an HTTP command?

Thank You, The reference page is very helpful. All of these examples must assume there is no password assigned to the device. I'm now trying to discover how to embed the admin/password into the HTTP:// command.

Another device I tested uses http://admin:password@192.168.x.x/ then in another window in my setup I provide the admin username and password...

(Complete Newbi) I purchased a Pro 2 after learning about Shelly and reading some notes. But now with a working unit on my network, I'm unable to find what I was looking for.

The ability to use an HTTP GET command to turn on the dry contact relays. Is this possible with this or other shelly devices. My video system uses http GET, PUT, PATCH, HEAD,

I would greatly appreciate seeing an example command to turn on a relay, assuming it is possible. Thanks.