Beiträge von Willbiker

Ok thanks. Are there any shelly devices which can accept the temperature probe out of the box or is the add on required in all cases?

Thank you

Thanks 66er but I dont need that much current capacity my immersion heater pulls 13a so a 1pm will do me fine. I just wondered if the permanent live power supply can be a separate supply to the supply it is measuring which will shut off and on . Will this work with a 1pm?

What do you think?

Thanks

Will

Good afternoon all!

I have a solar diverter installed which diverts any excess solar power to my hot water cylinder immersion heater. I would like to use a shelly device to measure the temperature of the tank and also monitor the power which is diverted to it. The problem I am facing is my solar diverter is a long way from my hot water cylinder so if I connect a shelly device to my immersion heater supply, the shelly device will only power up when the diverter has turned the power on. I understand this is not ideal.

I am however able to tap off of a near by socket to get a live supply to the shelly device so my question is.......Can I use a permanent live supply from a nearby socket to power the device and then connect the immersion heater to the switch output for monitoring the power consumption of the heater?

Thanks inadvance!